Vernier Charge Sensor
$89.00
Description
Numerical measurements improve many electrostatics experiments such as charging by induction, charging by friction, and charging by contact. The sensor can also be used to measure charge polarity.
An extremely high impedance voltage sensor with a 0.01µf input capacitor makes these measurements possible. The sensor has three operating ranges and a zeroing switch to discharge the input capacitor.
A special low-leakage BNC/Alligator clip cable is included.
Ranges:
± 0.5 V (+/- 5 nC)
± 2 V (+/- 20 nC)
± 10 V (+/- 97 nC)
Typical bias current = 0.005pA
Input Capacitance: 0.01 µF
What’s Included
- Vernier Charger Sensor
- Low-leakage BNC/Alligator Clip Cable
- User manual
Sensor Requirements
The Charge Sensor requires a compatible interface and software to collect data. Interface and software sold separately.
Compatible Interfaces
The Charge Sensor is compatible with these interfaces:
- LabQuest Mini
- Go!Link
- Vernier LabPro
- Vernier EasyLink
- CBL 2
- TI-Nspire Lab Cradle
Additional information
Weight | 2.8 lbs |
---|